ASTRO AMC-2000, Инструкция по установке и эксплуатации

Страница: 4 / 18

Page 2
UNPACKING INSTRUCTIONS
1. Unpack Stand and Feeder. Check parts against Parts List on Page 1 .
2. Install four casters to base of Stand.
3. Place Feeder on top of Stand by locating two mating points on bottom of Feeder. [Fig. 1]
4. Match two mating points with corresponding holes on top of Stand and slide into slots.
5. Locate two thumbscrew holes at front of Stand.
6. Install two (2) 1/4-20 x 1/2 inch thumbscrews provided in Accessory Kit .
7. Secure Feeder by tightening thumbscrews into threaded holes.
Figure 1