Configuration via the web interface
Operating manual HDQ 1 V2 - Version 07-2021A
page 18
GOP:
Group Of Pictures. Defines the use of I, P, and B frames in the video stream. Enter a
value between 1 and 60 here. The value selected depends on the encoding standard used (for
example, H.264 or H.265).
Latency:
Enter the existing latency from the generation of the signal to the arrival of the input
signal at the encoder here. Values between 50 and 1000 ms are possible.
TS-ID:
Enter the transport stream ID here.
ON-ID:
Enter the ON-ID for identifying the transport stream here.
CC Switch:
Enable the closed caption function, if desired, by turning this switch on.
Program Number:
Enter the program number here.
Program Provider:
The program provider can be entered here.
Program Name:
Enter the program name here.
PMT PID:
Enter the PID for the program map table here.
Video PID:
Enter the PID for the video data stream here.
AUDIO PID:
Enter the PID for the audio data stream here.
The following parameters can be changed for the QAM modulation:
Fig. 8: Modulator settings
DRAFT VERSION
Содержание 380 288
Страница 1: ...Version 07 2021A DRAFT VERSION ...
