ASTRO 380 288, Руководство по эксплуатации

Страница: 12 / 28

Suggested installation
Operating manual HDQ 1 V2 - Version 07-2021A page 12
Suggested installation
P
REPARATION
:
Before you install the device, first drill four holes
in a vertical installation surface and insert suitable wall plugs into the
holes. To do this, first place the device on the wall and mark the four
points at which the holes are to be drilled according to the position
of the fastening plates on the device.
The following describes how to install the device:
T
ASK
1. Place the back of the device against the mounting surface so
that its attachment points are exactly above the four screw
heads. The RF connection sockets of the device must point
downwards.
2. Now push the housing slightly downwards until the upper
edges of the attachment points press against the screws.
R
ESULT
:
The device is now attached and you can begin the connection.
DRAFT VERSION