The tool is not to be used for any other purpose or to light any type of fire in the
open air, in native or introduced vegetation (generally class fuels) in terrain that is
accessible on foot. This tool is not to be used from a vehicle boat or aircraft. Any
use other than stated in this manual may have severe safety consequences. This
tool is not to be used by children or untrained persons. Children are not to be near
this tool when it is being refueled or used. It is only to be used by a trained adult
as a hand held tool.
Only one tool in sound operating condition is to be used at a time, and the torch is
to be held in one hand only as described in this manual. If any work using this tool
becomes unsafe the use of this too must cease immediately and must not
recommence until the safety issues have been rectified. It is recommended that a
risk assessment is done for the work. Where there is any risk to safety identified by
a risk assessment for the work, the user must be appropriately trained and
supervised in using a Pacific Fire Lighter in the situation and then briefed about the
hazards and additional safety requirements prior to using this torch, including
safety to others.
The specific work practice for using the Pacific Fire Lighter is the responsibility of
the person, employer or agency in charge of the work place. Follow all employer or
agency instructions for associated work practices. Under poor visibility conditions
the user could face higher risks or become disorientated and create additional
hazards. The Pacific Fire Lighter is not recommended in use in poor visibility unless
the Pacific Fire Lighter operator is wearing high visibility clothing and can be easily
seen by others. Each tool will be subject to a range of use, treatment and
conditions that will cause wear and eventually this will cause failure of various
parts. Regular checks of the tool are essential to detect the first sign of parts
nearing the end of their service life. Flammable fuel leaking from a loose,
damaged or worn part is a risk. The purchaser is responsible for monitoring and
managing the servicing and inspection of this tool, supervising all repairs and
withdrawing unsound tools from service.
14. OPERATION FUNDAMENTALS
1. Safety comes first (plan your movements before commencing operations)
2. Correct fuel mixture (25% petrol to 75% diesel)
3. Use clean fuel only
4. Torch in good working conditions (no fuel leaks)
5. Keep torch clean (wipe off surface fuel with a rag)
6. Keep wick clean (use wire brush to remove carbon and dirt build up)
7. Operate torch correctly (aim wand 25 to 45 degrees forward of 90 degrees
in the direction you are walking. Do not drag the torch behind you, this can
be extremely dangerous).
Manufactured by;
Astro Metal
Mobile: 0413 742 303
Pacific Fire Lighter MKII
Instruction and Safety Manual
!
8
