SECTION 3
OPERATING THE ASTROJET 5000
20
When the Clean the Print Cartridge button is pressed the “Clean
the Print Cartridge(s)” window appears and prints the page
below.
Clicking on the
Intermediate Clean
button will present the
screen on the right. Clicking on the
Prime
button will take you
to the next level of cleaning if necessary. When the cartridges
are clean click on the
Done
button to exit this routine.
The
Display Ink Level
button will show you an
approximation of the amount of ink remaining in the
cartridges. This only works if you start with a new
cartridge and do not remove it during its use. Click
OK to exit this function.
The
Calibrate the Device
button is used to calibrate
the relationship between the black and color
cartridges to make
sure they line up
with each other.
This function is
usually performed
whenever a new ink
cartridge is installed
in the printer. Click
on
Done
when the
alignment is
completed or on
Align to repeat this
function. A copy of
the print that the calibration routine prints is shown here.
