Astro Machine ASTROJET 1000P, Руководство оператора

Страница: 9 / 38

SECTION 2
INSTALLING THE PRINTER
5
SECTION 2
– Installing the Printer
Before using the Printer:
x
Choose a location for Printer
x
Plug in Printer and connect it to computer
x
Install Inkjet Cartridges
x
Set up feed on Printer
x
Install Astrojet 1000P Printer Driver and BIOS Manager software on the computer
Choose a Location
Printer should be placed on a sturdy worktable or cabinet at least 12 inches from any walls. Protect
Printer from excessive heat, dust, and moisture
–
avoid placing it in direct sunlight.
Connecting Printer
Plugging in Printer
Make sure that
Printer’s
Main Power Switch is turned OFF.
1. Connect one end of the power cord to the
rear receptacle on the Printer.
2. Plug the other end into a 115-220 Volt
AC, 50/60 Hz. grounded outlet.
CAUTION
DO NOT USE ADAPTER PLUGS OR
EXTENSION CORDS TO CONNECT THE
PRINTER TO THE WALL OUTLET.
DO NOT USE OUTLETS CONTROLLED
BY WALL SWITCHES.
DO NOT USE OUTLETS THAT SHARE
THE SAME CIRCUIT WITH LARGE
ELECTRICAL MACHINES OR
APPLICANCES.
Connecting to Computer
Plug the Parallel Printer Cable from your computer
into the rear receptacle on the Printer. Latch the two
locking clips.
Cable used to connect the Printer to
the computer must not exceed 6 feet long.
NOTE: Parallel Port may be used for all versions
of Windows. USB Port is used only for Windows
XP and later versions.