Astro Machine ASTROJET 1000P, Руководство оператора

Страница: 26 / 38

SECTION 4
MAINTENANCE
22
Storage
Short-term Storage (
less than 2 days or less than 1 day in a hot and dry environment
)
Leave Cartridge in Printer for short periods of time, 1 day or less.
Next time that Printer is used, Printhead may have to be cleaned and purged.
Long-term Storage (
more than 2 days or more than 1 day in a hot and dry environment
)
Keep Printhead in an area that is relatively free of dust and paper particles that is not too dry.
Place Cartridges in a sealable plastic container with a damp sponge or towel to maintain
humidity and prevent Printhead from drying out.
When Cartridges are ready to be used again, Printhead will need to be cleaned.
Disposal
Cartridges may be disposed of in a normal manner.
In case of an ink spill, use soap and water to clean up any problem areas. Abrasive soap usually
removes ink off of hands.
Ink in the cartridge may be harmful if
swallowed. Keep new and used cartridges
out of reach of children. Discard empty
cartridges immediately.
Cleaning Printhead
Maintain good print quality by keeping Printheads clean. During printing process, ink spray, paper fibers,
and dust build up on Printheads. This build-up eventually degrades print quality. If you notice problems
with print quality, or to just prevent a build-up from occurring, wipe Printhead with a wet fiberless cloth.
Cloth should be: Cloth should not be:
D
Soft
D
Fiberless
D
Moistened with water
(
Distilled is best but tap water works
)
U
Abrasive
U
Made of small fibers
U
Dry or contain chemical additives
Wipe slowly across the long-axis with Printhead
facing down (
as shown
).
DO NOT apply excessive force, since this could
scratch the nozzle area.