Astro Gaming Mixamp, Инструкция по эксплуатации

Страница: 27 / 36

P27 pc setup
Step 2 - Connect the Microphone
Setting up the MixAmp™ as a USB Input/Output Device
The second step in connecting your new MixAmp™ is to attach
the included USB cable to an available USB port on your PC.
This will provide continuous power, and also act as a conduit
for your voice communications channel. Upon connection,
your computer will indicate that the ‘ASTRO Gaming USB
MixAmp’ has been found, installed and ready for use. The
MixAmp™ is driverless and installation is automatic.
Using Windows XP
After installation, right click on the Volume icon in your system
tray and open the ‘Adjust Audio Properties’ box on your
desktop. Navigate to the Voice tab, and confirm that both
Voice Playback and Voice Recording are set to the ‘ASTRO
Gaming USB MixAmp’. If not, change this using the drop down
menu on each of these categories.
Next, click on the Playback tab, and confirm that your ‘Default
Device’ is either set to your soundcard or onboard audio
solution for Sound Playback. This will enable the MixAmp to
be the default device for voice in/out and your soundcard for
game audio and give you full hardware mixing control via the
BALANCE
dial.
Important:
Alternatively, you may set the Sound Playback
to the ASTRO Gaming USB MixAmp if you DON’T want to
connect an extra audio cable and DON’T want to use the
mixing feature of the MixAmp™. A single USB cable is all you’ll
need for this type of configuration. Simply mix game and
voice volumes using the software for your audio and voice
programs.
Using Windows Vista
Upon installation, right-click on the Volume icon in your
system tray and open the Audio Devices sub-menu.
Under the Playback Tab, set your soundcard or onboard audio
solution (NOT the MixAmp™, in other words) as the default
playback device by right-clicking on the icon and selecting
‘Use this as my Default Playback Device’ in the pop-up menu.