Astro Gaming Mixamp, Инструкция по эксплуатации

Страница: 20 / 36

P20
The original Xbox requires an add-on box like the Microsoft
Xbox High Definition A/V Pack, and some Xbox 360 models
require the Microsoft HDMI A/V Cable kit. The Nintendo Wii
and GameCube output only via analog signals, but both
support Dolby Pro Logic II through the included analog cables.
The best method is to connect the MixAmp™ to your home
receiver’s RECORD OUTPUT with an optical cable. This is the
way to go if you have multiple consoles connected to your
system - your receiver will automatically send audio from the
selected source out to the MixAmp™.
Important:
make sure to select ‘Dolby Digital 5.1’ in your audio
preferences inside your console setup/options section. If you
have PCM 2.0 selected, for example, you will NOT get the
benefit of Dolby Digital 5.1 surround sound.
C) RCA Analog
- Connecting to the MixAmp’s rear
LEFT/
RIGHT
inputs: use this connection if you don’t yet have a
digital cable. The MixAmp™ supports Dolby Pro Logic II
(and its variants), giving you full surround sound even with
an analog connection. Use the supplied 4m RCA-to-RCA
Piggyback Cable to connect directly to the RCA output on
your home theater receiver. Alternatively, you may also use
the ‘Piggyback’ feature to intercept audio from between your
console and your receiver if you don’t have an open output.
As described in the digital sections above, it is best to connect
to your home theater receiver’s RECORD OUT - this way the
MixAmp™ will receive an audio signal from whatever source
you have selected.
Important:
If you don’t have a RECORD OUT on your home
theater receiver, simply connect the RCA-to-RCA Piggyback
cable in-between your console and where it is plugged in to
the receiver. This is a “line-level” signal (full volume) and you
will only need to adjust the volume of the MixAmp™ to achieve
full volume control.
CONSOLE setup - Home Theater