Astro Gaming Mixamp, Инструкция по эксплуатации

Страница: 15 / 36

P15 console setup - tv
2) RCA Analog --
Connecting to the MixAmp’s rear
LEFT/
RIGHT
inputs: use this connection if you don’t yet have a
digital cable. The MixAmp™ supports Dolby Pro Logic II (and
its variants), giving you full surround sound even with an
analog connection. You can use the supplied 4m RCA-to-RCA
Piggyback Cable to connect directly to the RCA output of
your television. Alternatively, if you don’t have a free OUTPUT,
you may use the ‘Piggyback’ feature to intercept audio from
between your console and your television by unplugging the
current RCA cables, inserting the ASTRO Gaming piggyback
ends into your television, and then replacing the original
cables by reinserting them into the female ends of the
piggyback connectors. Care should be taken not to mix up the
left/right cables by matching the red and white ends to the
matching colors of their connectors.
As described in the digital sections above, it is best to connect
to your television’s AUDIO OUT - this way the MixAmp™
will receive an audio signal from whatever source you have
selected. If your television has both FIXED and a VARIABLE
outputs, make sure to use the FIXED output so that you only
have to adjust the
MASTER VOLUME
control on the MixAmp™.
(The televisions own volume doesn’t affect a FIXED output).
Important:
If you don’t have FIXED audio outputs on your
television, simply connect the RCA-to-RCA Piggyback cable
between your console and your television. This is a “line-
level” signal (full volume) and you will only need to adjust the
volume of the MixAmp™ to achieve full volume control.
3) 3.5mm Headphone Jack (with optional cable) -- If you are
unable to connect your MixAmp™ using one of the methods
described above, use the headphone output jack on your
television by connecting the optional 3.5mm-to-RCA cable.
The volume of your television’s headphone jack is tied to
the volume of the television itself, so set the TV volume to
a suitable level (usually about halfway to 3/4 of full volume)
before adjusting the MixAmp™. You may get an unacceptable
amount of hum and background noise if the television is at or
near full volume, depending on the quality of your TV’s audio,
so try different settings to find the best quality.