background image

Inst315 

– Viron e-Quilibirum Series Chlorinator Instructions V07_14 

 

 The appliance is not intended for use by young children or infirm persons without supervision.   Please ensure 

that young children are supervised to ensure that they do not play with the appliance. 
 

  Controller must be installed according to AS 3000 wiring rules. 

 

  If the supply cord is damaged it must be replaced by AstralPool or its service agent or a similar qualified 

person in order to avoid a hazard. 
 

  This product is NOT suitable for use on Spa Pools UNLESS the OPTIONAL pH sensor has been purchased 

and installed. 
 

  When used on Spa Pool applications, AstralPool strongly recommend the purchase and installation of a 

chlorine sensor in addition to the pH sensor. 
 

  This product is NOT suitable for use on Indoor swimming pools UNLESS the pH and Chlorine sensors have 

been purchased and installed. 
 

  The Viron e-Quilibrium can only be purchased through a professional pool business and MUST be installed 

by that dealer. 
 

  Dose pool with a small amount of chlorine before starting the eQ.   If no chlorine is sensed the eQ may go to 

fail safe mode and not start up.  Some Chlorine should be present before starting the unit. 
 

  Take extreme care when handling the pH adjuster which is either sulphuric acid or hydrochloric acid.  Wear 

gloves, eye protection and breathing protection. 
 

  Before installing probes, balance pool water.  Total Alkalinity (TA) must be 80 to 120 ppm, Calcium Hardness 

should be 180 to 250 ppm, and pH must be between 7.2 and 7.6.  
 

  Cyanic Acid, sometimes referred to as stabiliser or sunscreen will suppress the Chlorine (ORP) reading when 

the Chlorine sensor is connected.   Refer to section on setting chlorine levels if Cyanuric Acid is present in your 
pool. 

 

 

 

 

 

 

 

 

 

 

Содержание Viron eQuilibrium Salt Chlorinator





























Отзывы: