Inst.419 Astral Pool Connect LITE+ Instructions V08-20
2
WARNING:
The transformer is not intended for series/parallel connection.
WARNING:
Never connect more than one light to a single power supply outlet. Each outlet on the
power supply must go to one - and one only – underwater light.
WARNING:
This device must only be connected to a 15Amp Outlet.
WARNING:
Never Exceed 14.5A combined total current draw from the two 240VAC GPO’s
The Connect LITE+ power supply has an IP23 rating, meaning it is suitable for installation outdoors. For
safe operation, the power supply must be installed in the correct orientation, with the cables leaving from
the bottom of the device. If installing the power supply near the pool or spa water, you must ensure that
the rules of AS3000 are followed at all times. AstralPool strongly recommends that installation be
performed by a registered pool builder, electrician or other suitably qualified person.
Contents
1.0 Introduction
3
1.1 Kit Contents
3
2.0 Basic Installation Instructions
4
2.1 Connection to a Viron Or EQ chlorinator
5
2.2 Install Menu
5
3.0 Using your Controller
6
3.1 Setting Timers on your Connect LITE+
6
3.2 Controlling your Connect LITE+ using the RF Remote Control
7
3.3 Controlling your Connect LITE+ using the Main Controller buttons
7
4.0 Advanced Installation Instructions
8
4.1 Install Menu - Advanced Set Up
– Selecting SLX or Spa Electric Lights and Clock Calibration 8
4.2 Install Menu - RF Installation
8
4.3 Connecting a Connect LITE to a Connect LITE+
9
4.4 Connecting a Touch Screen controller to a Connect LITE+
9
4.5
Connecting a “Touchscreen Transceiver” or a “Cable Free Extender” to a Connect LITE+
9
4.6 Connecting an Internet Gateway to a Connect LITE+
9
4.7 Registering “Pool Owner” and authorized “Users” of the pool App
12
4.8 Downloadi
ng the “ConnectMyPool App to your Smart Phone or Tablet
14
4.9 Internet Gateway Troubleshooting
15
