Astral Pool 43438-43579, Руководство по установке и обслуживанию

Страница: 6 / 68

S I G N A T U R E
COLOrPLus ECO: PusH BuTTON CONTrOL
The system features 14 operational modes: 7 fixed colours and 7 different colour sequences.
With each short stroke, you can make a colour or sequence change. With a long stroke, you
give the projector(s) a white colour.
Electrical connection diagram
The ColorPlus Eco system is composed of the
projector(s), the transformer and the push button,
which is normally close (NC).
The transformer must be large enough to supply 60VA
per led lamp that is connected to it. For example, if
you wish to control 5 lamps, you must connect them
in parallel to a 300VA transformer minimum. The push
button must be able to bear the power consumed by
the number of projectors used in the installation.
Operational modes
The ColorPlus ECO ensemble allows you to create different lighting scenes inside the pool with
two operational possibilities:
Fixed colour: Selection of a fixed colour among seven possible colours:
COLOr NuM. % rED % BLuE % GrEEN COLOur
1 100 100 100 White
2 100 0 0 Red
0 100 0 Blue
0 0 100 Green
5 100 100 0 Purple
0 100 100 Cyan
7 100 0 100 Yellow
Automatic colour sequence: Selection among seven colour sequence programmes. Each
programme is defined by the time each colour is present and the duration of the transition from
one colour to another as per the following table:
sEQuENCE OrDEr OF THE COLOurs
COLOur TIMING
(sEC.)
MIX TIMING (sEC.)
1 Red Blue Green Purple Cyan Yellow 2 2
2 Red Green Cyan Blue Purple Yellow
Purple Cyan Yellow - - -
Red Blue Green - - - 8 8
5 Purple Cyan Yellow - - - 18 18
Yellow Purple Cyan - - - 0,5 0,5
7 Green Red Blue - - - 0,5 0,5