5.2 Start up
5.3 How to use
WARNING
Before carrying out this operation, make sure that no person or object is under or near the
lift.
After making the connections, it is time to make the pertinent checks to ensure that the lift rises and falls
properly:
Simple effect (AE5000)
To raise the lift, press the pump pedal in the area of the toe. To lower the lift, press the pump pedal down
the heel area of the foot. In any situation, the elevator will go up or down as long as we continue to press
and remain quiet when we stop doing so.
Double effect (AE500R)
To raise the elevator, turn the handle to the up position (UP) and press the pedal. To lower the lift, turn the
handle to the down position (DOWN) and press the pedal.
In any situation, the lift will go up or down as long as we continue to press. If the pedal is released, the lift
will stop.
If the operations described in point 5 are carried out successfully, the powerLIFT is ready for use. These
operations must be checked before carrying out any operation. In addition, it must be ensured that the
mass of the vehicle to be treated does not exceed 3000kg, the maximum load authorized by the lift.
5.4 Set up the lift
Before placing the lift, it must be placed at the minimum or resting height (10.5 cm) with the arms collec-
ted. If there were irregularities in the pavement or there was some friction of the arms on the floor, raise
another half centimetre.
The powerLIFT is easily displaced thanks to the rudder that, once anchored, simply pull or push to direct it.
Whether the lift is placed under the vehicle or the vehicle that has been placed on the lift, make sure that
the lift is well centered longitudinally and transversely to the vehicle.
13
USER MANUAL
·
AE5000 powerLIFT / AE500R powerLIFT & move
