4.2 Safety areas
To achieve the safety necessary, it is recommended to define the space where the lift will be used at a
certain distance from another object or the wall.
4.3 Protection for the worker
The operator must always wear appropriate work clothes and adopt all necessary measures to maintain
safety in compliance with the regulation of occupational risk prevention. During work, the user must gua-
rantee their own safety, as well as the safety of the people and objects that surround them. The operator
must take into account all the recommendations contained in this manual.
5 Installation and start up
5.1 Pneumatic and hydraulic connection
The hydraulic pump that we supply with the powerLIFT can be single effect or double effect, according to
the needs of the customer. For more details, read section 3.1. (Components of the machine) and section
6. (How to use).
The air pressure in the network necessary to operate the elevator must be between 7 and 8 bars. Check
that the necessary pressure is correct and that there are no air leaks in the circuit.
WARNING
AIR BREATHER
Before the first use, open the screw indicated in figure 06 (three turns). This will allow the
air to pass to the oil tank every time we rise and fall the lift. If this operation is not done,
vibrations could happened during the use.
Simple effect case (AE5000)
The single-acting pump is provided with a hose on the front with a hydraulic quick-connect connection
and, on the rear, a pneumatic quick-connect connection. The hose that comes from the lift will be connec-
ted to the hydraulic connection. And, in the pneumatic connection, the hose of the compressed air supply
network of the workshop will be connected.
11
USER MANUAL
·
AE5000 powerLIFT / AE500R powerLIFT & move
