4
of
92
TECHNICIANS manual
I.III
TRANSPORT AND HANDLING
Hand crushing hazard
Handling operations must always and
exclusively be performed by Maintenance
Technician and in compliance with the
current health and safety regulations.
Before starting the transport and/or
handling manoeuvres, check the route,
dimensions needed, safety distances,
places suitable for placing the load down,
and the appropriate equipment for the
operation.
Handling operations must be carried
out by at least 2 people, or with the help
of special lifting equipment.
In view of the substantial weight of the
equipment, exercise great caution during
the handling operations.
The Manufacturer is not responsible for
any injury or damage caused by clothing,
lifting equipment and personal equip-
ment which was not suitable for the type
of intervention that the operator had to
carry out.
The packaging material must not be
left within the reach of children, since it
is a potential source of danger.
I.IV
INSTALLATION
Electrical hazard
Equipotential hazard
High temperature hazard
Do not perform maintenance
on moving components
Installation must always and exclusive-
ly be performed by Maintenance Techni-
cian and in compliance with the current
health and safety regulations.
The appliance’s water supply must pro-
vide water which is suitable for human
consumption, and must conform with
the regulations in force in the place of
installation.
The installer must carry out the hydrau-
lic connections in accordance with the
hygiene norms and the hydraulic safety
norms for environmental protection in
force in the place of installation.
This appliance is to be considered com-
pletely safe only when it is connected to
an efficient earthing system which com-
plies with safety standards.
The electric system must be equipped
with a suitable GFCI (circuit breaker). It
is important to have these requirements
checked. If in doubt, have the system
Содержание 2GR
Страница 91: ......
