Body jets
Based on the typical residential water pressure and flow rates not all of the body
jets can work at the same time. Because of this issue, the body jets are broken
down into separate zones. Based on the model, your unit will have either three or
four zones.
The operation of the jets in both models is essentially the same, with the only
difference being the function of the “shower” button. If your unit has four zones,
the “shower” button on the control panel will turn on the fourth zone (typically the
neck jets). If your unit has three zones, the “shower” button will turn on the
showerhead.
Use the following steps to operate the body jets:
1. Press the main “on/off” button to turn on the power.
2. Rotate the diverter valve to the body jet position.
3. The body jets have two modes of operation:
Local
and
Auto Cycle
.
A.
Local Mode
- You can choose an individual zone (lower, middle, and
upper back, or neck jets, if equipped).
NOTE:
You cannot turn on two local zones on at the same time due to the
water pressure and flow rate restrictions.
a. Press the local zone button you wish to turn on based on the diagram
located on the control panel.
Functions
40
17
21
22
23
