1. Remove and inspect all of the glass panels. If any are broken, please contact
your dealer or the manufacturer.
NOTE:
The glass panels are labeled to indicate the direction for the top of the
glass panels.
2. Remove and inspect the aluminum top and bottom rails for the glass
assembly.
NOTE:
The aluminum rails are labeled to distinguish the top and bottom rail and
their orientation within the assembly.
IMPORTANT: Please take note that Screw Pack 3 contains several different
lengths of screws each for a specific location within the glass assembly.
During the next steps of assembly, pay close attention so the correct screw
length is used in the correct location. Failure to do this can cause damage to
the glass panels and possibly result in leaks.
3. Place the bottom aluminum rail on the floor with correct orientation up to
receive the glass panel.
Step 4 Assemble the glass panel
15
M4x30mm
M4x60mm
SCREW PACK
(3)
