Install your unit according to the directions in this section in the order presented.
Step 1 Install the drain
Locate the accessory and manual box and remove the individual screw and
hardware packages and lay them out in sequential order to aid in completing
the rest of the installation.
Please see the diagram of the drain kit provided.
1. Determine the direction of the drain hose relative to the floor drain so that
after installation of the unit the drain hose and floor drain are in line with no
bends or kinks in the hose.
2. Install the upper drain body, P-trap/gas trap, lower gasket, and the lower
drain body onto the base.
NOTE:
Ensure that the direction of the hose outlet is in the desired direction for
the floor drain.
3. Apply a liberal amount of sealant to the joints between the upper and lower
drain body and the base. Wipe any excess sealant into the gaps to ensure a
quality seal.
4. Install the screws or locking nut provided.
Installation
12
DRAIN ASSEMBLY
(OPTIONAL)
Drain compression nut
Flex drain hose
Drain hose gasket
Lower drain body
Gasket
Upper drain body
Decorative drain cover
