Aston Global SDR981.00-R, Инструкция по установке и эксплуатации

Страница: 13 / 27

3. Insure plastic sliding door glide is in place in underside of sliding door track divider
(7) and positioned to proper location for 8mm glass thickness. See figure 3.
4. Position the sliding door track divider (7) into position as seen in figure 4 and mark
the 2 shower tray hole positions.
Note: In drawing 4 the hole locations for
attaching sliding door track divider should be 1 13/16" from edge of fixed
glass. See details in figure 4.
NOTE: If your surface is prone to cracking or chipping then it is
recommended that you pilot drill first using a smaller drill bit, and then step up
to the final size.
5. Using the appropriate drill bit for your tray surface drill hole locations with 1 /8"
diameter drill bit. Position the sliding door track divider (7) over drilled holes on
shower tray, and secure sliding door track divider (7) to shower tray using
hardware in screw pack 2. See figure 5.
1 2