3
PREFACE
The PLAQUE series underwater lights are
designed to use the latest LED lighting
technology for flush-mount installation where
the most important are low-profile casings to
avoid high water resistance and quality
materials to assure very reliability installation
and operation.
All the models are available in aluminium
bronze casings. The lighting is available in
white, blue or green colors or three-color. All
the models are designed with 18 power LEDs
and suitable power supply units.
FEATURES
Aluminium
Bronze
or Anodized Aluminium
Casing
18 Power LEDs Design
White, Blue, Green or Three-Color Lighting
Tempered Glass Optical Window
High-Efficiency
Lens
Low Power Consumption
Over-Temperature
Protection
Simple
Installation
Remote Control (optional)
PRECAUTIONS
The underwater light has to be installed and
used in accordance with the instructions of
this manual only.
The power supply has to be disconnected
before installation.
The underwater light is recomended to be
installed around 0.2 m below the waterline
for the best illumination and to avoid over-
heating.
Do not try to install or remove the
underwater light while the vessel is in the
water.
The optical window has to be cleaned by a
soft brush or cloth. Avoid using any
abrasive or chemical cleaner on the optical
window.
Avoid installing the power supply unit in
extremely hot places and near appliances
generating strong magnetic fields.
Do turn power off immediately and refer
servicing to qualified service personnel if
the underwater light does not operate
normally following the operating
instructions.
