WALL MOUNTED UNDERWATER LIGHT
HIDRO-SW300
INSTALLATION AND MAINTENANCE MANUAL
Please read this operation manual carefully and keep it for future reference.
Страница 1: ...WALL MOUNTED UNDERWATER LIGHT HIDRO SW300 INSTALLATION AND MAINTENANCE MANUAL Please read this operation manual carefully and keep it for future reference ...
Страница 2: ...standard or local authorities 4 Never handle it with wet hands and feet 5 This light is design for use only when fully submerged in water 6 Never operate this light for more than 1 minute unless it is totally submerged in water 7 All lights are required to be disconnected from the main electricity before any operation of maintenance 8 Maximum depth range for the light installation 1 10 meter 9 Max...
Страница 3: ...ght must be used or operated while fully submerged underwater only Never switch on the light if it is not underwater 1 Make sure to install the bracket on a vertical wall of the pool 2 Make sure the top of the light should be at least 450mm below normal water surface 3 Reserve at least 150mm long backup wire wrapping on the back of the light for the convenience of replacing 4 The junction box or t...
Страница 4: ...ctive parts It specifically excludes liability for direct incidental or consequential damages 1 Any of the 16 modes can be selected with the ON OFF switch of your pool lights 2 Turn the light ON 3 The 16 color modes will begin to run automatically 4 To change the color turn the light OFF and then ON within 15 seconds Continue turning OFF and ON until the desired light color mode is reached When th...
