WALL MOUNTED UNDERWATER LIGHT
HIDRO-SW200
INSTALLATION AND MAINTENANCE MANUAL
Please read this operation manual carefully and keep it for future reference.
Страница 1: ...WALL MOUNTED UNDERWATER LIGHT HIDRO SW200 INSTALLATION AND MAINTENANCE MANUAL Please read this operation manual carefully and keep it for future reference ...
Страница 2: ...ment standard or local authorities 4 Never handle it with wet hands and feet 5 This light is design for use only when fully submerged in water 6 Never operate this light for more than 1 minute unless it is totally submerged in water 7 All lights are required to be disconnected from the main electricity before any operation of maintenance 8 Maximum depth range for the light installation 1 10 meter ...
Страница 3: ...t must be used or operated while fully submerged underwater only Never switch on the light if it is not underwater 1 Make sure to install the bracket on a vertical wall of the pool 2 Make sure the top of the light should be at least 450mm below normal water surface 3 Reserve at least 150mm long backup wire wrapping on the back of the light for the convenience of replacing 4 The junction box or the...
Страница 4: ...urning OFF and ON until the desired light color mode is reached When the light is turned OFF for more than 1 5 seconds it will return to the beginning of the color cycle mode 0 Remote Controller Options There are 3 optional control ways 1 Power switch control 2 Remote control Hidro CTRL 3 synchrostep remote control The color modes can also be selected with the controller One remote control device ...
