5
EN
3. Unpacking and handling
• Check that the packaging and appliance are intact. Check the external
condition of the packaging and the appliance when you remove the
appliance from its packaging. Notify the vendor as soon as possible of any
problems with the packaging or the appliance.
• If the unit is tilted during transport, then wait at least 2 hours before starting
it up in order to prevent any damage.
• The Vault is designed for Heineken 5l kegs. Do not use appliance for other
products.
• The Vault should be used indoors at the room temperature of between
10° C and 38°C
• Lift the appliance correctly. The product may be lifted, when necessary,
from its base and back wall. Do not lift the door, tap or other external parts.
• Take the Vault out of its packaging, along with the drip tray and the
Heineken tap handle. Place them on a flat and dry surface that is clean and
large enough.
•
Avoid placing the appliance in direct sunlight or direct air flow!
• Clean the appliance externally and internally using a soft, lint-free cloth.
Don’t use detergents that contain abrasive ingredients. Use mild detergents
such as washing-up liquid. Dry the appliance carefully with a lint-free cloth.
• Checking the air inlet. Make sure that the air inlets at the top and back of
the appliance are not covered, minimum free space 50mm.
• Connecting to a power supply. Connect the appliance to an earthed socket
(10 A,220-240/50Hz) using the power cable supplied. Do not use extension
leads.
•
Operating the appliance for the first time. When connecting the appliance
to the mains current, check that the appliance starts up correctly. Using
the electronic temperature control, you can check that the temperature has
started to fall in (2-3 min).
• Install 5l kegs inside the Vault -> see page 3. Cooling of the beer to a
temperature of 3°C inside The Vault takes around 10 hours if the Keg and
the appliance are at room temperature (22°C).
• WARNING: Do not use mechanical devices or other means to
accelerate the defrosting process, other than those recommended by the
manufacturer.
