20
second)by 0.1second
Vacuum meter pointer keep stable
5
Cooling process
Sealing is finished, the cooling function will start running
cooling
(Cooling) front indicator lights.
Display: the time reduce from setting time (max.6
second)by 0.1second
Vacuum meter pointer keep stable
6
Deflation process
Once cooling completed, deflation function starts, the
atmosphere into the vacuum chamber reaches
atmospheric pressure in line with the outside world, then
the vacuum chamber lid will open their own.
Display: “□□”
vacuum meter pointer quickly move to right
7
Complete
vacuum meter pointer back to the right to reach the 0,
vacuum chamber lid open automatically.
Display show “Ed” work process finished
product has been packaged.
Note: When the sealing process has just begun, vacuum gauge pointer may swing, this
is not a malfunction.
Be careful! Damage to the machine!
Unreasonable parameter setting may cause damage or shorten the life of the machine.
3). parameter settings
Unreasonable parameter setting may cause damage or shorten the life of the
machine.
Unreasonable parameter settings may not complete all the correct procedures or
proper seal.
If you have questions about the operations and functions of the machine have
questions, please contact the manufacturer or supplier.
Note: only the machine stops running, can set the parameters.
For the use of computer board machine, if you did not complete the parameter
settings but pressure vacuum chamber lid, the machine is not running.
Relay panel parameter settings:
Time parameter settings:
DZ series (not available inflatable function) panel has three relay time can be adjusted:
the vacuum time, sealing time and cooling time. Rotation time relay adjustment knob
to the appropriate scale location.
Sealing voltage setting:
Machines have low, medium and high sealing voltage options, for thinner or thicker
vacuum bags. When sealing voltage set to "0" position, the machine will not be heated