.
Product Features:
● Multiple ways to access: Pin Code, RFID Card & Mechanical Key.
● Pin code: Elegant keypad with code scrambling feature. User can input random
digits before actual code to avoid password peeping as lock supports code
scrambling function.
● Dual authentication mode: After this setting dual authentication will be required to
access the lock at same time to open the door, suitable for high security access.
Dual authentication can be two RFID Cards or two pin codes. These can also be
a combination of any two accesses from Pincode or RFID Card.
● Master has the right to make different users. Lock can have 9 master users (can
be pin code or card). Total user capacity is 250
● Alarm: Tamper, low battery alarm and password protection.
● Lock will sound alarm in case of tampering with door or lock, when battery is low
or when repeatedly wrong password is used.
Remarks:
4
5
1.
After installation of lock please reset lock to factory default mode.
2.
Handle is the key part for opening and closing door, and its flexibility ratio
directly influences the usage of door lock, hence, don't hang articles on handle.
3.
This lock uses 4 AAA high-energy alkaline batteries (1.5V). When it prompts "the
voltage is low, please replace battery" for the first time, the door can be opened
for about 100 times as per different battery capacities; At this time, the battery
should be replaced promptly to avoid inconvenience due to the exhausted
battery.
4.
After continuous 5 times wrong card or code usage lock will be locked for 90
seconds.
1.
Reset factory default:
Press RESET at back of lock for 5 seconds, voice
will prompt reset succeed.
2.
Lock Settings:
2.1 Administrator Settings:
Touch screen keypad for lights on and press
# for
2 seconds, and press 1 for Administrator settings.
Press 1 again for
addition of Master User.
• RFID Card: Scan RFID card in front of RIFD Scanner. After
successful addition, voice prompts “1X1X Successful”.
• Pin Code: Enter 8 Digit Pin Code -> Press # -> Repeat
Pin Code-> Press#
After successful addition, voice prompts “1X1X Successful”.
To go back to the main menu press *
Press 2 for
Deletion of Master User.
• System will prompt “ Please input number”
Please input respective user number “1X1X” to delete
• Press # to confirm
Operations:
•
Installation Layout
Connection screw
Connection screw
Lock Body
Inside Panel Accessory
Outside Panel Accessory
Spindle
