18
An ASSA ABLOY Group brand
P/N AYRT-210-INST-FUL Rev E
Enable
Disable
Feature Programming Through Menu Mode Using Master PIN code*
1. Enter the 4-8 digit Master PIN code followed by the key.
2. Enter digit corresponding to the function to be performed followed by the key.
Note: If the lock is connected to a network controller, it is recommended that it is
programmed through the centralized user interface (PC or hand-held device) to
ensure communication between the lock and the controller unit.
1
2
Master Code Registration
M
M
User Number (UN)
1~25: without network module
1~250: with network module
User PIN Registration
U
For quiet areas, select Disable (3)
in Audio Mode.
Register
Delete
Advanced Lock Settings
Audio Mode
All Code Lockout
Register
Enable
Enable
Disable
Delete
Disable
**This function appears
only with RF network
module installed.
Enable
Disable
Automatic Re-lock Setting
Inside Indicator Light
One Touch Locking Setting
Enable
Disable
Note: If the lock is connected to a network controller,
it is recommended that it is programmed through
the centralized user interface (PC or hand-held
device) to ensure communication between the lock
and the controller unit.
**Network Module Setting
N/A
*
A unique Master PIN Code must be entered prior to any further programming of the lock.
(See section on page 16 "Register Master PIN Code Before Programming")
Default settings
in
bold
.
