P/N
-
Rev A
YRL TS-MNL-0018
20
Setting Definitions
*The Master Entry Code must be created prior to any other programming of the lock.
Creation
required*
Settings
Default Setting
Master Entry Code
Definition
The Master Entry Code is used for programming
and for feature settings. It must be created prior to
programming the lock. The Master Code will also
operate (unlock/lock) the lock.
Auto Re-lock
Disabled
After a successful code entry or manual unlock
with the key (YRL226), the lock will automatically
re-lock after each unlock in an effort to keep your
home secure. This feature is optional, and can be
turned off. In the ON mode, the lock will
automatically re-lock after thirty (30) seconds.
Inside Indicator Light
Disabled (Off)
Located on the interior lock. Shows active status
(Locked) of lock and can be enabled or disabled in
the Advanced Lock Settings (Main Menu selection
#3).
One Touch Locking
Enabled
When the latch is retracted, activating the
touchscreen will extend the latch (during Auto Re-
lock duration or when Auto Re-lock is disabled).
When One-Touch Re-lock is not in use (disabled),
any valid Entry Code will re-lock the lock.
Volume
Enabled (Low)
The volume setting for Entry Code verification is set
to Low (2) by default; otherwise it can be set to
High (1) or Silent (3) for quiet areas.
Language
English
Choosing English (1), Spanish (2) or French (3)
becomes the (default) setting for the lock voice
prompts.
All Code Lockout Mode
Disabled
This feature is enabled by the Master Entry Code.
When enabled, it restricts all Entry Code access
except Master. When attempting to enter a
code while the lock is in All Code Lockout mode,
the RED locked padlock will appear on the screen.
Wrong Code Entry Limit
5 Times
After five (5) unsuccessful attempts at entering a
valid Entry Code, the lock will shut down and not
allow operation for sixty (60) seconds.
Shutdown Time
60 Seconds
The lock will shutdown (flashing RED) for sixty
(60) seconds and not allow operation after the
Wrong Code Entry limit (5 attempts) has been met.
