background image

P/N

-

Rev A

YRL TS-MNL-0018

28

Ÿ

 Consult the dealer or an experienced radio/TV technician for help.

Class B Equipment 

FCC:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits 
are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can 
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio 
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful 
Interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to 
correct the interference by one or more of the following measures:

Industry Canada:

Ÿ

 Connect the equipment into an outlet on a circuit different from that to which the  receiver is connected.

This Class A digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations. 
Cet appareillage numérique de la classe A répond à toutes les exigences de l'interférence canadienne causant des règlements d'équipement. 

Ÿ

 Reorient or relocate the receiving antenna.

Ÿ

 Increase the separation between the equipment and receiver.

Warning: Changes or modifications to this device, not expressly approved by ASSA ABLOY Residential Group could void the user's 
authority to operate the equipment.

Product Support Tel 1-855-213-5841 • www.yalehome.com

Yale® and Assure Lever® are registered trademarks of ASSA ABLOY Residential Group.  

Other products' brand names may be trademarks or registered trademarks of their respective 

owners and are mentioned for reference purposes only. 

© Copyright 2020. All rights reserved. Reproduction in whole or in part without the express written 

permission of ASSA ABLOY Residential Group is prohibited.

Yale Home

Содержание Yale Assure Lever YRL226

































Отзывы: