background image

Housings

 ABS/polycarbonate

Environment

-10˚C t

o 40˚C

70%

An ASSA ABLOY Group brand

Installation

Learning the device into your alarm system.

1.

 Put the control panel/hub into learning mode. Please see your Alarm manual for details.

2.

 Insert the batteries to power on the Smoke Detector.

3.

 The Smoke Detector will emit 2 short beeps and it will begin set up for 1 min. The red LED will flash 

every 2 seconds.

4.

 During the 1 min period press the learn/test button for 3 seconds. The Smoke Detector will emit a 2 

tone beep.

5.

 When the Smoke Detector completes the set up, it will emit a beep to indicate it is now in calibration 

mode. The calibration mode lasts for 1 to 9 minutes. The red LED will continue to flash every second 

during calibration. It's not possible to learn the device in during calibration.

6.

 When calibration is completed, the Smoke Detector will emit 2 short beeps. If the device was not added 

into the panel/hub previously, you can now press the learn/test button to complete learning.

For more information about how to pair the device into your alarm system, please visit yale.co.uk/help

Hereby, ASSA ABLOY Ltd., School Street, Willenhall,

West Midlands, England WV13 3PW declares that the radio

equipment type AC-PSD is in compliance with Directive 

2014/53/EU. The full text of the EU declaration of

conformity is available at the following internet address:

www.yale.co.uk/declaration-of-conformity

PACKAGING

A

C-PSD-v05

AC-PSD

3V

CR 123

2

1

3

Learn / Test button

Each sensor ( PIR, heat, smoke) will be 

learnt in as individual devices. If you can 

see only one sensor in your app device 

list after learning (eg. only PIR sensor) 

you need to repeat the learning process 

to add the others. (Put the control 

panel/hub into learn mode, then press 

the learn / test button on the device).

Отзывы: