Assa Abloy SMARTair Wireless, Руководство пользователя

Страница: 6 / 20

12/04/2016 - 6 - Concept
At this moment the Wireless devices are operational but only with Off-Line functionality.
This means the customer already can access the door with his card.
The next step is to add the hub(s) to the system.
This requires some IT knowledge and some preparation work needs to be done in advance together with the client or the IT
service of the client.
3 Setting up the hub(s)
Every hub in the system requires an unique static IP address which is able to communicate with the (server) PC.
The hub ‘s use the UDP ports, 7780, 7781, 7790 and 7791
Please make sure the IT service of the client is aware of these ports and that you have all the information needed to configure
the hub(s) like IP address, Sub netmask, Gateway, ….
3.1 Led indications
Led DL1, means that there is power to the hub.
Led DL2, if this is blinking, the hub is communicating and/or performing an operation.
The RJ45 network connector has two status led ‘s, one green and one yellow.
The green led indicates activity on the port (cable connected on both sides)
The yellow led blinks every time there is an signal on the RJ45 port.