KP8877/KP8878 x ET x Lever Design
Keypad Operated RIM Exit Device
3
1.
Insert wires and connector from the outside of the
door,through the fire stop plate (if required)
• For non-12- exit devices, feed wire harness from
keypad assembly through hole in door
Inside
of door
C
Lower
lug
Fire
stop
plate
Connector & Wires
go through fire stop
plate
Lower
lug
Outside
of door
Inside of
door
Connector &
wires through
fire stop plate
Flat
washer
#8-32 Pan head
screw
Inside
of door
Outside
of door
Rim Installation Instructions for
KP8800 Series (Continued)
• From the inside of the door, use the
#8-32 x 1-1/4” pan head screw
with the flat washer to attach the
escutcheon using the lower lug
• Straighten keypad escutcheon
and tighten the #8-32 x 1-1/4”
pan head screw
Step #4 Outside Keypad Escutcheon
10
A7137C
Copyright © 2018, Sargen
t Manufacturing Company
, an A
SS
A AB
LO
Y G
roup company
. All right
s reser
ved
.
Reproductions in whole or in par
t without express writ
ten permission of Sargen
t Manufacturing Company is prohibited
.
01/31/18
