9
7300 Series
Installation Instructions
Multi-Point Lock
A8270A 02/20
Copyright © 2017, 2019, 2020 SARGENT Manufacturing Company. All rights reserved. Reproduction in whole
or in part without the express written permission of SARGENT Manufacturing Company is prohibited.
1-800-727-5477 • www.sargentlock.com
3 Installation
(cont.)
g
Install Bottom Strike (cont.)
Flush Mount
(Figure 9)
Mortise the strike into the floor 1/4" deep.
(Optional for 3/8" door to floor gap.)
IMPORTANT
Use a vacuum or compressed air to
clear holes of debris. (Figure 10)
Cross Sectional View
Flush Mount
(Figure 11)
Surface Mount
(Figure 12)
Drill two (2) 3/8"
diameter holes
by 2-1/4" deep.
Chisel the bottom strike pocket
1" deep to ensure the bolt has
full projection.
Figure 12
IMPORTANT
Use a vacuum or compressed air to
clear holes of debris. (Figure 13)
Cross Sectional View
Surface Mount
(Figure 14)
1"
2 1/4"
Figure 14
Drill two (2) 3/8"
diameter holes
by 2-1/4" deep.
Chisel the bottom strike
pocket 1" deep to ensure
bolt has full projection.
1/4" D
EEP
Figure 9
Use the anchor tool
to set anchors.
Figure 10
1"
2 1/4"
Figure 11
Use the anchor tool
to set anchors.
Figure 13
