KESO KEK i-turn
KESO AG, 10/2010
Subject to change
Page 4 of 18 Pages
2
Product description
The KESO KEK i-turn thumbturn is an electronic cylinder. It is intended for indoor use
only in locations where stricter control and safety requirements need to be met. The
KESO KEK i-turn thumbturn can be easily and quickly installed into existing doors
without any wiring. It can be adapted perfectly to structural conditions and fulfils high
architectural standards. k-entry
TM
, authorisations can be managed centrally in combination with
the KESO management software.
Like all KESO KEK products, the KESO KEK i-turn thumbturn is NOK (network on key)
compatible.
3
Application site
For
indoor use
only
.
The threshold values as specified in the technical data must be observed (see Item 13).
4
Ordering information
Photo
Item No.
Designation/Description
21.43V.060.00.00.KT
KESO KEK i-turn thumbturn double
cylinder
Standard length: 30/30 mm
Extension:
both sides, in 5 mm increments;
maximum 80/80 mm
21.43W.060.00.00.KT
KESO KEK i-turn thumbturn single
cylinder
Standard length: 30/10 mm
Extension:
one side, in 5 mm increments;
maximum 80/10 mm
4.1
Scope of delivery
1 unit
KESO KEK i-turn thumbturn cylinder with standard actuator
1 unit
65 mm fixing screw
1 unit
Battery
1 unit
Screw set
1 unit
Assembly instructions
1 unit
Tool for replacing the batteries
