KESO KEK i-turn
KESO AG, 10/2010
Subject to change
Page 12 of 18 Pages
13
Technical data
13.1
Product compatibility
13.1.1
Electronic firmware
-
from AIO firmware; V4 and above
13.1.2
Software
-
KESO k-entry
TM
Management Software version V5 and above
13.1.3
KESO Programmer
-
KESO KEK Programmer PPG V2 (firmware V1.02 Pro Rev. F and above)
13.2
KESO KEK i-turn thumbturn general data
Range of use:
backsets of 35 mm and above
(without cylinder projection)
Outside knob length:
50.5 mm
Knob diameter:
36.5 mm
Cylinder material:
brass, matt nickel-plated
Knob material:
rubberised plastic, black
Power supply:
one 3.0 Volt Lithium battery, type CR2
Battery life:
about 40,000 lock procedures or 2 years
Battery end recognition:
automatic
Protection rating:
IP 50
Reader method:
contactless (RFID)
Operating temperature:
0 to +50° C
Humidity:
15 to 70%, non-condensed
Time slots:
24, each divided into 8 time intervals
Special days:
3 (e.g. works holidays, holidays, public holidays)
Event logging:
500 events (FIFO) with date, time,
door designation, person, operation
User keys:
8,000 per electronic system
Programming interfaces:
KAPI cable in connection with
the KESO KEK Programmer PPG V2
Certification: CE
Application type:
interior
stand-alone
13.2.1
Data regarding KESO KEK i-turn thumbturn double knob cylinder
Standard cylinder length:
min. 30.5/30.5 mm
max. 80.5/80.5 mm
Extendable on inside:
5 mm increments up to a max. 50 mm extensions
Extendable on outside:
5 mm increments up to a max. 50 mm extensions
Inside knob length:
48.3 mm
Total length of double door knob: min. 158.8 mm
max. 258.8 mm
13.2.2
Data regarding KESO KEK i-turn thumbturn single cylinder
Standard cylinder length:
min. 30.5/9.5 mm
max. 80.5/9.5 mm
Extendable on outside:
5 mm increments up to a max. 50 mm extensions
Total length of half door knob:
min. 90.5 mm
max. 140.5 mm
