60
EN
Operation
Transfer changed authorisations to the electronics
The authorisations were changed in
k-entry
®
and transferred to the
Programming device
(“Transfer changed
authorisations to the programming device”, page 58). Changed authorisations are transferred to the
electronics with the
Programming device
.
1 Connect
the
Programming device
to the electronics to be updated using a suitable cable (e.g. a USB
cable or KAPI cable).
2
Authorise yourself with an Ident medium.
3
Click on the icon
(Fig. 12).
The number of
· electronic systems to be programmed is displayed.
· electronic systems already programmed is displayed.
4
Select whether the date and time should be set.
5 Click
on
program
.
Depending on the device setting, the event memory can be read (“Settings”, page 52).
6
Follow the on-screen instructions.
The changed authorisations have been transferred to the electronics.
Fig. 12 :
Principle:
Transfer data to an
electronics system
Detailed view
System
Displays the current system.
List of electronics
Displays the electronics of the current installation located in the database of the
Programming device
.
Depending on the pre-setting, up to three additional designations are displayed
Show/hide
When activated (field blackened), only the electronics with programming requirements are displayed.
Status of the electronics
· Black text: Programming requirements
· Green text with pre-set checks No programming is required (however, multiple programming is
generally possible).
· Red text with pre-set cross: Programming not possible:
Содержание Keso K.536
