Assa Abloy Corbin Russwin ED8200A Series, Руководство по установке

Страница: 2 / 8

2
ED8200A Series
Installation Instructions
Fire-Rated Rim Exit Device
FM124B 04/20
For installation assistance contact Corbin Russwin
1-800-543-3658 • techsupport.corbinrusswin@assaabloy.com
Copyright © 2011, 2020 ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole or
in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
1 Determine Hand of Door
IMPORTANT
• Failure to follow these instructions could affect
operation of this product and void warranty.
• Some trim designs are handed when used with this
device (see trim instructions).
• Exit devices must be securely fastened to properly
reinforced doors with fasteners which will not loosen or pull out. Add reinforcement when necessary.
• Before Installing:
• Be sure exit device is the proper hand for your door. (Figure 1)
• Use enclosed template to ensure proper operation.
Figure 1
Push side
Pull side Left Hand
Reverse
Bevel Door
Right Hand
Reverse
Bevel Door
TOC Table of Contents
1 Determine Hand of Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
2 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
3 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
a Mark Horizontal Centerline of Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
b Install Trim (If Furnished) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
c Cut Pushbar (If Required) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
4 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
a Mount ED8200A Exit Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
b Install Strike . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
c Install Front Bar Insert, Rear & Front Covers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
d Test Pushbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7