3
ED8200A Series
Installation Instructions
Fire-Rated Rim Exit Device
FM124B 04/20
For installation assistance contact Corbin Russwin
1-800-543-3658 • [email protected]
Copyright © 2011, 2020 ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole or
in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
2
Package Contents
ED8200A
Qty .
Description
Latch Assembly
6
#12-24 x 7/8" Phillips flat head machine screws
Rear Bracket
2
#12-24 x3/4" Phillips pan head machine screws, and #12 internal
washers (wood doors #12 x 1-1/4" Phillips pan head, type A, tapping
screws)
Strike, UL
4
#12-24 x 7/8" Phillips flat head machine screws
Front Bar Insert
1
#8-32 x 1" Phillips pan head machine screw
Rear Cover
1
#8-32 x 1" Phillips flat head machine screw with external washers
Front Cover
2
#8-32 x 1/2" Phillips flat head machine screw, type F, with external
washers
Non-Reinforced Door
4
#12-24 x 1-21/32" sex nuts
3
Preparation
a
Mark Horizontal Centerline of Device
Establish a centerline of device by drawing a line across the door and the door stop, 40-5/16" (1.02 m)
above finished floor unless doors have been pre-prepped. (Figure 2)
b
Install Trim (If Furnished)
See separate trim installation instructions.
Figure 2
Of Device
Door
Finished
Floor Line
40-5/16"
(1.02 m)
Jamb
Of Strike
