4
Surface Vertical Rod
Installation Instructions
Exit Devices
FM164 09/19
Copyright © 2013, 2019, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole
or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
For installation assistance contact Corbin Russwin
1-800-543-3658 • [email protected]
Figure 3
Shim (2) supplied
Strike plate
Strike
(3) 10-24 x 5/8" PFHMS or 10 x 1" PFHWS
Top latch
(3) 10-24 x 1/4" PRHMS
Top
mounting
plate
(2) 1/4-20 x
3/4" PFHMS
(2) 8-32 x 1/4" PFHMS
End clamp
(3) 8-32
x 1/4"
PUFHMS
End cap
(2) 1/4-20 x 3/4" PRHMS
or (2) #14 Wood screws
For metal, composite, and wood doors of either hand
Bottom rod and latch components not supplied with
less bottom rod devices (LBR), M55 Option.
Outside Trim
Device is packed ready for
any compatible trim.
Dogging
Feature to hold bolts retracted and
touchpad depressed, for push-pull
door operation.
To Dog Service
1. Insert dogging key.
2. Depress and hold touchbar.
3. Turn key 1/4 turn clockwise.
(Not a feature of fire labeled devices.)
Dogging key
Cover
(2) 8-32 x 1/4" PUFHMS
(2) 1/4-20 x 3/4" PRHMS
(2) 8 x 3/8 "PFH"AB"SMS
Roll pin
Top rod
(2) #8 x 1/2"
PRH "AB" SMS
Rod guide
Latch cover
Top rod
connector
Guide cover
Bottom rod
connector
Bottom rod
(2) 8 x 3/8" PFH "AB" SMS
(3) 10-24 x 1/4" PRHMS
Guide cover
Deadbolt
Bottom bolt case
(2) 8-32 x
1/4" PFHMS
Strike
(2) 1/4-20 x
3/4" PFHMS
Bottom
mounting
plate
(2) #8 x 1/2"
PRH "AB" SMS
Rod guide
Roll pin
Hole
plug (fire
devices)
Latch cover
