CLX3300
Installation Instructions
Cylindrical Lockset
7
FM566 05/21
Copyright © 2021, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in whole or in
part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
For installation assistance contact Corbin Russwin
1-800-543-3658 • [email protected] •www.corbinrusswin.com
Provided less core. Tailpiece included (See Figure 21).
1. If needed, rotate clip to leave appropriate slot on tailpiece open
for locking pin.
2. Remove key from core.
3. Unscrew threaded cap from end of core (it will be necessary to
depress the locking pin).
4. Place tailpiece inside the exposed end of core with locking pin
in open slot.
5. Reverse step 3 to reinstall cap.
6. Install core in lock normally.
See FM207 for more details.
1. Provided less cylinder.
2. Depress cap pin and unscrew end cap to remove
tailpiece from competitor’s cylinder.
3. Insert new tailpiece in orientation shown.
4. Re-aassemble end cap over new tailpiece.
b
Lever to Accept Schlage
®
LFIC (M69)
c
Lever to Accept Schlage
®
or Yale
®
Fixed Core Cylinder (M06 or YC Option)
12
Miscellaneous Options
Figure 21
d
Lever to Accept Yale
®
LFIC (YRC Option)
1. Provided less cylinder
2. Slide provided spacer over tailpiece
3. Insert driver assembly into back of core.
Competitor’s
Cylinder
Cap Pin
End Cap
