3
FE6600 and BL6600 Series
Installation Instructions
Multi-Point Lock
FM470 03/20
For installation assistance contact Corbin Russwin
1-800-543-3658 • [email protected]
Copyright © 2017, 2019, 2020 ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved. Reproduction in
whole or in part without the express written permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
2
Changing Indicator Slides
1. Remove snap ring.
2. Remove rotation plate, spindle, and slide.
3. Replace with alternate slide.
4. Reassemble spindle and rotation plate.
Note:
Ensure proper orientation of VAC/OCC Slide.
5. Replace snap ring into groove in button.
Rotation Plate
Slide
Slide
Spindle
Snap Ring
M19V
O V O
C A C
C C C
M19S
Figure 4
Fold here according to door hand and bevel
Figure 5
Low side of door.
Inside LHRB
Outside RH
Centerline of lockbody
No bevel door
High side of door.
Inside LH
Outside RHRB
2-3/4"
1-3/8"
9/16"
1/2" diameter hole
Lever or
knob
For metal doors:
drill two (2) pilot
holes
0.106 (#36 drill)
and tap
(#6-32 Unc)
9/16"
Cylinder
2-1/2"
