CL33600 Series Cylindrical Lock
9
Copyright © 2017 Corbin Russwin, Inc. All rights reserved.
Reproduction in whole or in part without the express written
permission of Corbin Russwin, Inc. is prohibited.
5) Installation Instructions (Continued)
5.
Install Lock:
Feed lock body and wire through 2-1/8” diameter hole from outside of door.
Be sure latch engages lock body as shown (Fig. 5).
IMPORTANT: Door must remain open during installation. Use door stop.
Fig. 5a Detail
Outside Face of Door
6.
Install Inside Spring Cassette:
a. Feed lock body wires and cassette (REX) wires in slot on face of door (Fig. 6a)
Note: Be careful to keep wires in slot cut into door.
b. Tightening using two #12-24 screws.
Note: DO NOT PINCH wires when tightening.
Fig. 6a
Fig. 6b
Inside Face of Door
Fig. 5
Keep wires in slot:
DO NOT pinch under
Spring Cassette
Lock Body Wires
REX Wires
Ground Wire
Spring Cassette