ASSA ABLOY is the global
leader in door opening solutions,
dedicated to satisfying
end-user needs for security,
safety and convenience
ASSA OEM AB
P.O. Box 371
SE-631 05 Eskilstuna
Sweden
Phone +46 (0)16 17 70 00
Fax +46 (0)16 17 71 77
Customer support:
Phone intl. +46 (0)16 17 70 00
[email protected]
www.assaoem.se
ASSA ABLOY, the global leader
in door opening solutions
W
e reserve the right to correct any printing errors and update the information after printing.
M3296.1404
Programming Instructions
ASSA Coded 1.2
Limited time locked
(#) Master Code (*) 10 (*) (maximum number of hours the
lock remains locked) (*) (*)
Example: (#) 11335577 (*) 10 (*) 04 (*) (*)
Result: The lock will automatically be opened after 4 hours.
If the lock is opened within 4 hours and a new User Code is
entered, the clock starts over and the time interval is once
again 4 hours.
NOTE! This program will only work when the lock has been
set to B) single use. The maximum number of hours that the
lock may remain locked, written as two digits, is 02, 03, 06,
08, 10 or 12.
Change from B) Single use to A) Repeated use
Master Code (*) 11 (*) (*)
Example: 11335577 (*) 11 (*) (*)
Result: The lock reverts to
A) Repeated use
with standard user
Code 2244 active until the lock is reprogrammed
NOTE! When the program is changed from
B)Single use
to
A) Repeated use
the latch must be moved to locked status and
previous codes are deleted. The (#) key will now be required
for programming.
Enable Caretaker mode
Master Code (*) 12 (*) Caretaker Code (*)
Caretaker Code (*) (*)
Example: 11335577 (*) 12 (*) 555555 (*) 555555 (*) (*)
Result: The lock is set in caretaker mode Code 555555.
NOTE!
1. Caretaker Code is only accessible in
B) Single-user
mode
2. Caretaker Code can open the lock without deleting the
single-user Code
3. Opening lock with master Code deletes user Code
Disable caretaker mode Master Code (*) 13 (*) 13 (*) (*)
Result: Caretaker Code is deleted
Enable/disable buzzer
By default, the buzzer is enabled each time the key is
pressed. To disable the buzzer, set the following Code
sequence:
Master Code (*) 14 (*) 14 (*) (*)
Result: No sound is heard when the keys are pressed. To
enable the buzzer, repeat the above Code sequence.
