ASSA ABLOY, the global leader
in door opening solutions
Programming Instructions
ASSA Coded 1.2
PROGRAMMING THE LOCK
• Each programming command must be initiated by
pressing the (#) key, since the lock is in B) repeated use
mode (factory setting), followed by either the Master
Code, Group Code or User Code
• When the lock is in B) single-user mode the (#) key does
not have to be pressed for programming. Just make sure
that the lock does not have a User Code programmed
• If necessary, the (#) key can be used to delete a previous
incorrect entry.
• To enter a valid Code the maximum time allowed between
each key press is 10 seconds, otherwise the Code will be
deleted
COMMANDS ACCESSIBLE WITH MASTER CODE
(#) – Refers to pressing the Program key
(*) – Refers to blue blinking from LED
Change Master Code
(#) Master Code (*) 01 (*) New Master Code (*)
New Master Code (*) (*)
Example: (#) 11335577 (*) 01 (*) 12345678 (*)
12345678 (*) (*)
Result: Master Code 12345678 is now operational
Note: (#) is not required in mode
B) Single-user mode
Set or change User Code
(#) Master Code (*) 02 (*) User Code (*)
Example: (#) 11335577 (*) 02 (*) 1455 (*) (*)
Result: New User Code 1455 is now operational
Delete User Code
(#) Master Code (*) 03 (*) (*)
Example: (#) 11335577 (*) 03 (*) (*)
Result: User Code is deleted
Set or change Group Code
(#) Master Code (*) 04 (*) Group Code (*)
Group Code) (*) (*)
Example: (#) 11335577 (*) 04 (*) 22446688 (*)
22446688 (*) (*)
Result: Group Code 22446688 is now operational
Note: (#) is not required in mode
B) Single-user mode
Delete Group Code
(#) Master Code (*) 05 (*) 05 (*) (*)
Example: (#) 11335577 (*) 05 (*) 05 (*) (*)
Result: Group Code is deleted
Note: (#) is not required in mode B) single-user mode
COMMANDS ACCESSIBLE WITH GROUP CODE
(#) – Refers to pressing the Program key
(*) – Refers to blue blinking from LED
Change Group Code
(#) Group Code (*) 06 (*) New Group Code (*)
New Group Code (*) (*)
Example: (#) 22446688 (*) 06 (*) 11335500 (*)
11335500 (*) (*)
Result: Group Code has been changed to 11335500
Note: (#) is not required in mode
B) Single-user mode
Set or change User Code
(#) Group Code (*) 07 (*) User Code (*) (*)
Example: (#) 11335500 (*) 07 (*) 9999 (*) (*)
Result: New User Code 9999 is now operational
Delete User Code
(#) Group Code (*) 08 (*) (*)
Example: (#) 11335500 (*) 08 (*) (*)
Result: User Code is deleted
COMMANDS ACCESSIBLE WITH USER CODE
(#) – Refers to pressing the Program key
(*) – Refers to blue blinking from LED
Change User Code in mode a) Repeated use
(#) User Code (*) New User Code (*)
New User Code (*) (*)
Example: (#) 2244 (*) 5541 (*) 5541 (*) (*)
Result: User Code changed to 5541
Change User Code in mode B) Single-user mode
Enter CODE to lock (*)
Enter the same CODE to open (*) (*)
NOTE!
1. When the lock is opened with a Code in single-user mode,
the Code is deleted and the lock will be ready for a new
Code
2. When the lock is locked in single-user mode, the red LED
light blinks every two seconds
3. The keypad is active only when the handle is in upright
position
SPECIAL COMMANDS ACCESSIBLE WITH MASTER CODE
(#) – Refers to pressing the Program key
(*) – Refers to blue blinking from LED
Change from a) repeated use to B) Single use
(#) Master Code (*) 09 (*) (*)
Example: (#) 11335577 (*) 09 (*) (*)
Result: The lock now works in mode B) single use. NOTE!
1. The keypad is now inactive when the handle is in open
position
2. Only Master Code and Group Code will be retained from
A) Repeated use
.
