A8265A 08/19
7
AL-500 Series
Installation Instructions
Alarmed Exit Devices
1-800-327-8539 • www.arrowlock.com
Copyright © 2019, ASSA ABLOY Access and Egress Hardware Group, Inc. All rights reserved.
Reproduction in whole or in partwithout the express written permission of ASSA ABLOY Access and
Egress Hardware Group, Inc. is prohibited.
7
Alarmed Exit (AL500) Standard Operating Instructions
a
Arm Alarm
Turn key clockwise. Yellow PASSAGE LED will flash for 15 seconds (default),
then a quick chirp and ARMED green LED will flash and repeat every
30 seconds. Signal above cylinder indicates unit is armed (Figure 14).
NOTE:
Unit is automatically armed 15 seconds after it is turned on.
Field selectable settings listed at bottom of page.
b
Security/Tamper Violation
When ARMED, depressing the push rail will activate alarm. Horn will
sound and red violation LED will flash. The horn will continue to sound
for two (2) minutes (default). After two (2) minutes, unit will reset on
its own and red LED will flash every 30 seconds until rearmed using the
key. Turn key counter-clockwise to deactivate alarm. Turn key clockwise
to rearm alarm (Figure 15).
c
Low Battery Alert
Horn chirps intermittently to indicate low battery condition.
Replace 9-volt alkaline battery (Figure 16).
Figure 14
Figure 15
Figure 16
