ASROCK U3S3 FX страница 33 Скачать руководство пользователя

Страница: 33 / 56

3 3

NOTE. If you install Windows

XP / XP 64-bit on IDE HDDs and want to manage (create,

convert, delete, or rebuild) RAID functions on SATA / SATA2 HDDs, you still need to

set up “SATA Operation Mode” to [RAID] first. Then, please set the RAID configuration

by using the Windows RAID installation guide in the following path in the Support CD:

.. \ RAID Installation Guide

2.16.2 Installing Windows

7 / 7 64-bit / Vista

Vista

64-bit With RAID Functions

If you want to install Windows

7 / 7 64-bit / Vista

/ Vista

64-bit on a RAID disk

composed of 2 or more SATA / SATA2 HDDs with RAID functions, please follow below

steps.

STEP 1: Set up BIOS.

Enter BIOS SETUP UTILITY

Advanced screen

Storage

Configuration.

Set the “SATA Operation Mode” option to [RAID] for SATAII_1 to SATAII_4

ports.

STEP 2: Use “RAID Installation Guide” to set RAID configuration.

Before you start to configure RAID function, you need to check the RAID installation

guide in the Support CD for proper configuration. Please refer to the BIOS RAID

installation guide part of the document in the following path in the Support CD:

.. \ RAID Installation Guide

STEP 3: Install Windows

7 / 7 64-bit / Vista

/ Vista

64-bit OS on your

system.

STEP 3: Use “RAID Installation Guide” to set RAID configuration.

Before you start to configure RAID function, you need to check the RAID installation

guide in the Support CD for proper configuration. Please refer to the BIOS RAID

installation guide part of the document in the following path in the Support CD:

.. \ RAID Installation Guide

STEP 4: Install Windows

XP / XP 64-bit OS on your system.

After step 1, 2, 3, you can start to install Windows

XP / XP 64-bit OS on your system.

At the beginning of Windows

setup, press F6 to install a third-party RAID driver.

When prompted, insert the SATA / SATA2 driver diskette containing the AMD RAID

driver. After reading the floppy disk, the driver will be presented. Select the driver to

install according to the OS you install. (Select “AMD AHCI Compatible RAID Controller-

x86 platform” for Windows

XP, or “AMD AHCI Compatible RAID Controller-x64 platform”

for Windows

XP 64-bit.)

Содержание U3S3 FX
























































Результаты поиска

Содержание U3S3 FX

Отзывы:

Похожие инструкции для U3S3 FX

Бренды по названию

Популярные бренды

ASROCK U3S3 FX, Руководство пользователя

Результаты поиска

Содержание U3S3 FX

Отзывы:

Похожие инструкции для U3S3 FX

Бренды по названию

Популярные бренды