ASROCK U3S3 FX страница 32 Скачать руководство пользователя

Страница: 32 / 56

3 2

2.15 Driver Installation Guide

To install the drivers to your system, please insert the support CD to your optical drive

first. Then, the drivers compatible to your system can be auto-detected and listed on

the support CD driver page. Please follow the order from up to bottom side to install

those required drivers. Therefore, the drivers you install can work properly.

2.16

2.16 Installing Windows

Installing Windows

7 / 7 64-bit / Vista

Vista

64-bit / XP / XP 64-bit With RAID Functions

If you want to install Windows

7 / 7 64-bit / Vista

/ Vista

64-bit / XP / XP 64-bit on

a RAID disk composed of 2 or more SATA / SATA2 HDDs with RAID functions, please

follow below procedures according to the OS you install.

2.16.1 Installing Windows

XP / XP 64-bit With RAID

Functions

If you want to install Windows

XP / XP 64-bit on a RAID disk composed of 2 or more

SATA / SATA2 HDDs with RAID functions, please follow below steps.

STEP 1: Set up BIOS.

Enter BIOS SETUP UTILITY

Advanced screen

Storage

Configuration.

Set the “SATA Operation Mode” option to [RAID] for SATAII_1 to SATAII_4

ports.

STEP 2: Make a SATA / SATA2 Driver Diskette. (Please use a USB floppy or

floppy disk.)

Insert the ASRock Support CD into your optical drive to boot your system.

During POST at the beginning of system boot-up, press <F11> key, and

then a window for boot devices selection appears. Please select CD-

ROM as the boot device.

When you see the message on the screen, “Generate Serial ATA driver

diskette [YN]?”, press <Y>.

Then you will see these messages,

Please insert a blank

formatted diskette into floppy

drive A:

press any key to start

Please insert a floppy diskette into the floppy drive, and press any key.

The system will start to format the floppy diskette and copy SATA / SATA2

drivers into the floppy diskette.

Содержание U3S3 FX
























































Результаты поиска

Содержание U3S3 FX

Отзывы:

Похожие инструкции для U3S3 FX

Бренды по названию

Популярные бренды

ASROCK U3S3 FX, Руководство пользователя

Результаты поиска

Содержание U3S3 FX

Отзывы:

Похожие инструкции для U3S3 FX

Бренды по названию

Популярные бренды