ASROCK P4TWINS-HDTV, Руководство пользователя

Страница: 32 / 41

3 2 3 2
3 2 3 2
3 2
BIO S S E T UP U T ILI T Y
IDE Configuration
v02.54 (C) Copyright 1985-2005, American Megatrends, Inc.
A dvanced
OnBoard IDE Controller
OnBoard SATA Controller
SATA Class Code
Primary IDE Master
Primary IDE Slave
Secondary IDE Master
Secondary IDE Slave
[Both]
[Enabled]
[AHCI]
[Hard Disk]
[Not Detected]
[ATAPI CDROM]
[Not Detected]
Select Screen
Select Item
+- Change Option
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
Select Screen
Select Item
+- Change Option
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
DISABLED: disables the
integrated IDE
Controller.
PRIMARY: enables only
the Primary IDE
Controller.
SECONDARY: enables
only the Secondary IDE
Controller.
BOTH: enables both IDE
Controllers.
ATA Combination Mode [Disabled]
3.3.4 3.3.4
3.3.4 3.3.4
3.3.4 IDE Configuration IDE Configuration
IDE Configuration IDE Configuration
IDE Configuration
ATA Combination Mode
The default value is [Disabled]. If you set this option as [Enabled], the
options OnBoard IDE Controller, OnBoard SATA Controller, and SATA Class
Code will not appear. Then, PATA devices will only connect to secondary
channel, SATA devices will only connect to SATA1 and it will work as
primary channel.
OnBoard IDE Controller
You may enable either the primary IDE channel or the secondary IDE channel.
Or you may enable both the primary and the secondary IDE channels by
selecting [Both]. Set to [Disabled] will disable the both. Configuration options:
[Disabled], [Primary], [Secondary], [Both].
OnBoard SATA Controller
Use this item to enable or disable the “OnBoard SATA Controller” feature.
The default value is [Enabled].
SATA Class Code
Use this to programe SATA controller’s class code. Configuration options:
[AHCI], [RAID]. The default value is [AHCI].