2 2
Chipset Configuration:
AGP Aperture Size:
It refers to a section of the PCI memory address range
used for graphics memory. It is recommended to leave this field at the
default value unless the inserted AGP card requires other sizes.
AGP Data Rate:
The default setting is [Auto]. You may select between [8X] or
[4X] for an AGP 3.0 card, or select among [4X], [2X], [1X] for an AGP 2.0
card.
AGP Fast Write:
This allows you to enable or disable the feature of AGP fast
write protocol support.
USB Controller:
Use this to enable or disable the use of USB controller.
USB Device Legacy Support:
Use this to enable or disable support to emulate
legacy I/O devices such as mouse, keyboard,... etc.
DRAM CAS Latency:
This is used to adjust the means of memory accessing.
Configuration options: [Auto], [2T], [2.5T], [3T]. Please note that not all the
DDR DIMMs can support CAS latency=3T.
CPU Thermal Throttling:
Select [Enabled] will enable P4 thermal control
circuit to keep CPU from overheated.
AMIBIOS SETUP UTILITY - VERSION 3.31a
Advanced
AGP Aperture Size
AGP Data Rate
AGP Fast Write
USB Controller
USB Device Legacy Support
DRAM CAS Latency
CPU Thermal Throttling
[
Setup Help
]
F1:Help
Esc:Previous Menu
F9:Setup Defaults
F10:Save & Exit
+/-:Change Values
Enter:Select
Sub-Menu
:Select Item
Chipset Configuration
Auto
Disabled
Enabled
Disabled
Auto
Auto
<Enter> to select the
size of mapped memory
for graphics data.
64MB
