1 4
FLOPPY1
Pin1
Red marking
IDE1
PIN1
IDE2
PIN1
80-Pin ATA 100/133 cable
Connect this
end
to the IDE devices
BLACK
Connect this
end
to the motherboard
BLUE
USB_PWR
USB_PWR
P+5
P-5
P+4
P-4
GND
GND
DUMMY
1
DUMMY
GND
+5V
IRTX
IRRX
1
CD-R
GND
GND
CD-L
AUX-R
GND
GND
AUX-L
CD1
AUX1
2.8 Connectors
Connectors are NOT jumpers. DO NOT place jumper caps over
these connectors.
Connector
Figure
Description
FDD connector
(33-pin FLOPPY1)
(see p.7/p.8 item 10)
Note: Match the red marking on the floppy ribbon cable with Pin1.
Primary IDE connector (Blue)
Secondary IDE connector (Black)
(39-pin IDE1, see p.7/p.8 item 7)
(39-pin IDE2, see p.7/p.8 item 8)
Note: To optimize compatibility and performance, please connect your hard disk
drive to the primary IDE connector (IDE1, blue) and CD-ROM to the
secondary IDE connector (IDE2, black).
USB 2.0 header
ASRock I/O
TM
provides you
(9-pin USB45)
4 default USB 2.0 ports on the
(see p.7/p.8 item 13)
rear panel. If the rear USB
ports are not sufficient, this
USB 2.0 header is available
for 2 additional USB 2.0 ports.
Infrared module connector
This connector supports an
(5-pin IR1)
optional wireless transmitting
(see p.7/p.8 item 14)
and receiving infrared module.
Internal audio connectors
These connectors allow you
(4-pin CD1, 4-pin AUX1)
to receive stereo audio input
(CD1: see p.7/p.8 item 24)
from sound sources such as
(AUX1: see p.7/p.8 item 23)
a CD-ROM, DVD/ROM, TV
tuner card, or MPEG card.
